PRECISION-COATER™ Module of the MP-1
Multi-Processor™ Concept
The MULTI-PROCESSOR™ has been developed by Aeromatic-Fielder to meet the industry's requirements for flexibility in unit operations and is based on the principle that one basic unit can be used for numerous processes simply by interchanging a module.
- The Drying module
- The Top Spray Granulation module
- The Spray Dryer Granulator module
- The PRECISION-GRANULATOR™ module
- The PRECISION-COATER™ module
The concept is available in sizes ranging from the laboratory unit MP-1, up to full production scale equipment built in compliance with current GMP and safety standards. Only the highest qualities of materials are used to build the MULTI-PROCESSOR™ giving you a long lasting and reliable unit for your process work.
MP-1 Fluid Bed Processor
Features:
- Self-contained control unit
- PLC control system with Siematic S7
- Local operator interface terminal
- Automatic recipe control function
- Data-capture equipment
| Size |
12 litre bowl |
16 litre bowl |
| Drying |
kg |
0.2 - 2 |
1 - 6 * |
| Top Spray Granulation |
kg |
0.2 - 1 |
1 - 3 * |
| Spray Dryer Granulator |
kg |
0.2 - 1 |
1 - 6* |
| Precision-Coater™ |
kg |
0.2 - 1 |
1 - 6 ** |
* Products with bulk density of 0.5gms/cm3
** Products with bulk density of 0.8gms/cm3
Options for Special Applications
The standard MP-1 is equipped to carry out the majority of every day processing. However, to meet special customer requirements a range of options is available.
- Reduced volume containers
- Selection of air distributors
- Hinged expansion piece
- Product agitator
- Powder injector system
- HEPA filtration of inlet air
- Dehumidification of inlet air
- Humidification of inlet air
- Steam or ceramic heater
- Closed cycle operation
- Solvent recovery system
- Selection of filter materials
- Police filters
- Built-in fan ("Compact Design")
- Noise attenuator (silencer)
- Screen based control panel
- Expanded control packages
- Data logging
- Recipe handling
- Explosion-proof controls
- 10 bar pressure shock resistant design
Easy Scale-Up
All process can be carried out also in large scale MULTI-PROCESSOR™.
With the MULTI-PROCESSOR™ concept maximum flexibility is achieved because the function of the eqiopment can be changed at a later date by simply using another module.
If the high flexibility of the Multi-Processors is not required, large scale plants can also be built as dedicated production units using Aeromatic-Fielder's "Building Block System".
| Technical Data |
| Standard 16 ltr Product Container |
Min. batch weight |
350 g |
|
Max. batch weight |
6.0 kg |
| Standard 12 ltr Product Container |
Min. batch weight |
200 g |
|
Max. batch weight |
4.5 kg |
| Peristaltic pump |
Throughput rate |
300 ml / min |
| Customer Supply |
Europe |
3 x 380 v |
|
USA |
3 x 480 v |
| Electrical data |
Europe |
50 Hz |
|
USA |
60 Hz |
|
Electrical power (max.) |
18 kW |
|
Electrical heater |
13.5 kW |
|
Compressed air |
6 barg |
| Weight (approx.) |
850 kg |
| Dimensions (L x W x H) |
1700 x 1000 x 2800 mm |